Fair 4.1" Wide Black 24VDC 300W LED Dimmable Power Supply
For installations requiring consistent, flicker-free lighting control, the Fair 4.1" Wide Black 24VDC 300W LED Dimmable Power Supply delivers robust performance in a compact chassis. This unit converts standard line voltage to a stable 24-volt DC output, supporting up to 300 watts of LED tape or fixtures. Its slim 4.1-inch width allows discreet mounting inside cabinets, under counters, or in junction boxes, while the black housing blends with dark environments. Compatibility with leading 0-10V and TRIAC dimmers enables smooth brightness adjustments from 1% to 100%, making it ideal for accent, task, or architectural lighting.
Engineered for reliability, the power supply includes over-current, short-circuit, and thermal protection to safeguard connected LEDs. The fanless design ensures silent operation, critical for bedrooms or studios. Input and output terminals simplify wiring, and the unit operates efficiently across a wide input voltage range. Whether powering under-cabinet strips or linear fixtures, this dimmable driver offers the precision and durability demanded by both residential and commercial spaces.
- 9" wide x 4.1" deep x 3.1" high.
- Hardwire 24VDC energy-efficient LED magnetic dimmable power supply by SlimEdgeâ„¢.
- Black powder-coated.
- Transformer is encapsulated in all metal construction enclosure. Enclosure temperature should not exceed 65-degree C (149-degree F) @ 40-degree C (104-degree F) ambient.
- Wiring compartment has three knockouts sized for 3/4" screw cable connectors.
- Wiring compartment cover is hinged with rivets and opens vertically from bottom to top.
- Thermal class B-130C. Input leads are 18 AWG. Output leads are 12 AWG.
- Lead insulation rated to 105-degree C (221-degree F). Transformer utilizes a class B 130-degree C (266-degree F) insulation system.
- Max wattage is 300 watts. Output is 24V.
- Works with low-voltage magnetic wall dimmer with on-off switch.
- No minimum load (can be fully loaded).
- Manual reset thermal 4A circuit breaker on the primary side.
- Coil former is double section bobbin.
- Surface mount with back mounting tab.
- UL listed for indoor and outdoor use.