Lithonia 6" LED IC/Non-IC New Construction/Remodel Housing

Click for more product variations!

This 6" LED airtight aluminum standard recessed housing is rated IC or non-IC and is for use in remodel or new construction applications. Approved for all ceiling types (except air-handling plenums) and for direct burial in insulation. Galvanized bar hangers expand up to 24" and feature stepped-shank nail and positioning guide with integral T-bar locks and 2 locking screws to hold fixture into position. Ground wire provided, and tilt-up J-box door allows easy access. Quick disconnect provided for power connection to the LED module. Expandable hangers allow off-center mounting in wood joist or T-bar ceilings. Maximum width 25 1/2", minimum width 13 1/4", or cut to fit 5 9" on center joist construction. Vertical adjustment of housing allows for flush-mounting with ceiling face. UL-listed and rated for wet location; Title 24-compliant. Compatible with Lithonia Lighting recessed light products.

• 6" LED IC/non-IC recessed light housing for new construction or remodel applications.
• Air tight aluminum housing.
• Galvanized bar hangers span up to 24".
• Ground wire and tilt-up captive J-box door provided.
• 120 volt only.
• 2" x 8" wood joist or T-bar installation.
• Vertical adjustment allows flush-mounting with ceiling face.
• Suitable for ceilings up to 1 1/2" thick.
• UL-rated and listed for damp locations; Title 24-compliant.
• Can be made Wet Location rated by use of a lensed reflector.
• Compatible with Lithonia Lighting recessed products.
• 9" wide.
• 13" deep.
• 7" high.
• Ceiling cut-out 7 1/8".

You may interest