Panamá Jack Tables for Bora Decks That Seat the Whole Crew

The 47-inch round Panamá Jack table fits a 10-foot Bora deck with 6 inches of clearance on each side, while the 63-inch oval needs a 12-foot span to keep walkways open. Most buyers pick the round version first, then realize they need more seating for weekend cookouts. The decision comes down to how many chairs you actually pull up, not how many you think you will.

What the Panamá Jack Table Does Differently on Composite Tiles

The Panamá Jack line uses teak-grade eucalyptus with a honey-brown stain that fades to a silver-gray over time. The Bora deck system relies on 12-inch composite tiles, so the table base must span at least two tiles to stay stable. The 47-inch round model has a 28-inch pedestal base that covers about 2.5 tiles, which stops the rocking that happens with narrow four-leg frames.

The table weighs 40 pounds, light enough to drag for cleaning but heavy enough to resist a 15 mph gust. The slatted top drains rain instantly, so you do not get standing water between the boards. This matters on a Bora deck because water can seep into the tile gaps and leave dark stains.

How Many People Fit Around the 47-Inch Round Table?

The 47-inch round seats four adults with dinner plates, but adding a pitcher or a bread basket makes elbows touch. The 63-inch oval seats six people with room for a serving platter down the center. The oval uses a 30-inch rectangular base, which needs a deck section at least 36 inches wide to bolt down securely.

The 39-inch square table suits a narrow balcony or a small Bora strip, but it looks lost on a full deck. For most residential setups, the 47-inch round wins because it fits standard 10-foot decks without sacrificing walkway space.

When the 63-Inch Oval Justifies the Extra Cost

If your Bora deck runs 12 x 14 feet or larger, the 63-inch oval creates a proper dining zone instead of a cramped corner. The longer shape follows the deck board direction, which makes the space feel organized rather than chopped up. You can pair it with six stackable chairs and still keep a 3-foot path around the perimeter.

The oval also handles family-style meals better. A round table forces dishes to cross the center, while the oval lets two people reach the same platter without leaning. The extra 16 inches of length adds about $100 to the price, but the seating gain pays off for households with more than four regular diners.

Can You Bolt the Pedestal Base Directly to Bora Tiles?

1. Place the table on the Bora tiles and trace the four base holes with a pencil.
2. Lift the table and drill pilot holes through the tile surface, avoiding the gaps between tiles.
3. Insert the included stainless steel lag bolts and tighten with a wrench until snug.
4. Set a 24-inch bubble level across the slats and adjust the rubber shims under the base.
5. Re-tighten all bolts after 48 hours, since eucalyptus wood compresses slightly under load.

Do not mount this table on a Bora deck installed directly over bare soil without a weed barrier. The bolts need a solid subfloor to hold their grip. On rooftop decks, use the rubber shims from the box to protect the tile finish from scratches.

Keeping the Eucalyptus Finish Looking Fresh

The honey-brown stain fades naturally within 6 to 12 months of sun exposure. If you want to keep the warm tone, apply a teak sealer twice a year, once in early spring and once in late summer. A teak sealer for outdoor furniture costs about $25 per quart, enough for two coats on the 47-inch table.

Prefer the silver-gray weathered look? Skip the sealer and let the wood age naturally. Clean the slats with a soft brush and mild soap every two weeks to stop mold from forming in the gaps. A Panamá Jack table cover runs about $40 and shields the top from heavy rain and bird droppings.

Picking Chairs That Match the 28-Inch Table Height

The table surface sits 28 inches high, which pairs with standard deck chairs that have a 17-inch seat height. A set of teak folding deck chairs works well because they store flat against a wall when not in use. For the oval table, choose chairs with a 19-inch seat depth so knees clear the table edge comfortably.

Add a rectangular outdoor table runner to the oval model to define each place setting. The runner should be 72 inches long to hang evenly over the 63-inch top. On the round table, use a 30-inch round placemat set instead of a runner, which looks awkward on a curved edge.

Measuring Your Bora Deck Before You Order

Measure from the house wall to the railing and subtract 6 feet for walking space. The remaining number is the maximum table diameter you can use. A 10-foot-deep deck gives you 4 feet of usable space, which fits the 47-inch round with 6 inches of breathing room on each side. A 12-foot deck gives you 6 feet, which fits the 63-inch oval but leaves no room for a side cart or cooler.

The pedestal base keeps the corners open for planters or a drinks station, which is the main advantage over a four-leg table. Four-leg frames block chair placement at the corners and make the deck feel tighter than it is. If you host large gatherings, the oval table with a pedestal base lets you squeeze two extra chairs at the ends without hitting the legs.

You may be interested in other topics